UV Absorber 770
CAS No. 52829-07-9
Content 98%
Packing 25kg/bag
Names and Identifiers
Name
Photo-stabilizer HS-770
Synonyms
BTPS
UV770
UV-770
HALS 770
BHSORB-770
Tinuvin770
TINUVIN 770
adkstabla77
Tinuvin 770...
Category：Paint chemicals
Introduction
CAS No. 52829-07-9
Content 98%
Packing 25kg/bag
Names and Identifiers
| Name | Photo-stabilizer HS-770 |
| Synonyms | BTPS UV770 UV-770 HALS 770 BHSORB-770 Tinuvin770 TINUVIN 770 adkstabla77 Tinuvin 770 Sunsorb 770 Primesorb770 Light stabilizer 770 Photo-stabilizer HS-770 light stability agent 770 Light Stabilizing Agent 770 Hindered amine light stabilizer 770 bis(2,2,6,6-tetramethyl-4-piperidyl)sebacate BIS(2,2,6,6-TETRAMETHYL-4-PIPERIDYL) SEBACATE Bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate Bis(2,2,6,6-tetramethyl-4-piperidinyl)sebacate BIS(2,2,6,6-TETRAMETHYL-4-PIPERIDINYL)SEBACATE Bis-(2,2,6,6-tetramethyl-4-piperidinyl)-sebacate bis(2,2,6,6-tetramethyl-4-piperidinyl)decanedioate bis(2,2,6,6-tetramethylpiperidin-4-yl) decanedioate bis(3,3,5,5-tetramethylpiperidin-4-yl) decanedioate 2,2-bis(2,2,6,6-tetramethylpiperidin-4-yl)decanedioate DECANEDIOIC ACID BIS(2,2,6,6-TETRAMETHYL-4-PIPERIDYL) ESTER Decanedioic acid bis(2,2,6,6-tetramethyl-4-piperidinyl)ester |
| CAS | 52829-07-9 |
| EINECS | 258-207-9 |
| InChI | InChI=1/C28H52N2O4/c1-24(2)16-20(17-25(3,4)29-24)28(23(33)34,15-13-11-9-10-12-14-22(31)32)21-18-26(5,6)30-27(7,8)19-21/h20-21,29-30H,9-19H2,1-8H3,(H,31,32)(H,33,34)/p-2 |
| InChIKey | XITRBUPOXXBIJN-UHFFFAOYSA-N |
52829-07-9 – Physico-chemical Properties
| Molecular Formula | C28H52N2O4 |
| Molar Mass | 480.72 |
| Density | 1.01±0.1 g/cm3(Predicted) |
| Melting Point | 82-85°C(lit.) |
| Boling Point | 499.8±45.0 °C(Predicted) |
| Flash Point | 421°F |
| Water Solubility | 18.8mg/L at 23℃ |
| Solubility | acetone: 19% (w/w) at20°C |
| Vapor Presure | 0Pa at 20℃ |
| Appearance | White powder |
| Color | White to Almost white |
| pKa | 10.49±0.10(Predicted) |
| Storage Condition | Room Temprature |
| MDL | MFCD00134709 |
| Physical and Chemical Properties | White crystalline powder. Melting Point 81~85 °c. |
| Use | Mainly as a highly efficient hindered amine light stabilizer, suitable for polypropylene, polyethylene, ABS resin and polyurethane |
52829-07-9 – Risk and Safety
| Risk Codes | R23 – Toxic by inhalation R37/38 – Irritating to respiratory system and skin. R41 – Risk of serious damage to eyes R51/53 – Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R36 – Irritating to the eyes |
| Safety Description | S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S39 – Wear eye / face protection. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 2811 6.1/PG 2 |
| WGK Germany | 2 |
| RTECS | HD8315000 |
| TSCA | Yes |
| HS Code | 29333990 |
| Hazard Class | 6.1 |
| Packing Group | II |
52829-07-9 – Reference Information
| LogP | 0.35 at 25℃ |
| ultraviolet absorber | light stabilizer 770, sebacic acid di (2,2,6,6-tetramethyl -4-piperidinyl) ester. Among the world’s first hindered amine light stabilizer products born in the 1970 s, 770 is the only hindered amine product still used in the contemporary plastic industry. The annual consumption of domestic 770 accounts for about 20% of the total consumption of hindered amine light stabilizer. The quality of domestic 770 products is close to the level of foreign 770 products, and domestic 770 exports a certain amount every year. Light stabilizer 770 is mainly used as a high-efficiency hindered amine light stabilizer, suitable for polypropylene, polyethylene, ABS resin and polyurethane. The product characteristics are as follows: 1. It can effectively absorb ultraviolet rays with a wavelength of 290-400nm, or can quench the energy of excited state molecules, or has the ability to capture free radicals. 2. Its own light stability and thermal stability are good. 3. Good compatibility and no exudation during use. 4, resistant to hydrolysis, water and other solvent extraction. 5. Low volatility and low pollution. 6, non-toxic or low toxicity, cheap and easy to obtain. |
| physical properties | ▼ ▲ colorless or yellowish crystalline powder transmittance 425nm ≥ 98% 500nm ≥ 99% volatile ≤ 0.5% ash ≤ 0.1% melting point 80 ℃ – 85 ℃ solubility (20 ℃) acetone 19g/100g ethyl acetate 24g/100g benzene 46g/100g water <0.01g/100g low toxicity |
| properties | light stabilizer 770 appearance is white crystalline powder. Melting point 81 ℃ ~ 86 ℃, soluble in ethanol, ethyl acetate, benzene and other organic solvents, insoluble in water. It is a representative variety of low molecular weight HALS. Its light stabilization efficiency is high, suitable for polyethylene, polypropylene, polystyrene, ABS and other products, especially in polyolefin products, the light stabilization effect is 3 to 4 times that of ultraviolet absorber and nickel quencher, due to the relative molecular mass Small, high volatility, poor migration resistance and extraction resistance, it is suitable for use in thick products. |
| application | light stabilizer 770 is suitable for polypropylene, high density polyethylene, polyurethane, polystyrene, ABS resin, etc. 770 light stabilization effect is better than that of commonly used light stabilizer at present. Combined with antioxidants, it can improve heat resistance, and it also has a synergistic effect with ultraviolet light absorbers, which can further improve the photostability effect. mixed light stabilizer 944, light stabilizer 770. This is an excellent UV stabilizer, especially PP thick section, providing excellent surface protection. It also shows high stability rate PP tapes. Light stabilizer 791 application PP, PP / EPDM andPP/polyethylene/ethylene propylene diene monomer bren (TPO). Light stabilizer 791 is an excellent thick part of ultraviolet stabilizer, such. Automobile bumpers, fascia, etc. are mainly used as high-efficiency hindered amine light stabilizers, suitable for polypropylene, polyethylene, ABS resin and polyurethane, etc. used for polypropylene, high-density polyethylene unsaturated resin, Polyurethane, polystyrene and ABS resin, its light stabilization effect is better than the currently commonly used light stabilizers |
| store | avoid sunlight, humidity and high temperature. |
Inquiry
Factory & Shipment
