STD-501 quick-drying anti-rust oil
We are a manufacturer based in China. We specialize in providing high-quality STD-501 quick-drying anti-rust oil for industrial clients across various sectors. Whether you need chemicals consultation or technical support, our team is here to help.
Category：Anti-rust materials Own Brand：MT /MOQ:100KG /From China/ B2B only.
Introduction
Product Description
This oil is a light brown transparent oil, composed of a variety of special anti-rust agents and dehydrating surfactants and mineral oil agents, vegetable oil agents, etc. It complies with the Japanese JISK2246-80-NP3 standard and the US military MIL-C16173D-1968-3 standard and dries quickly. At the same time, we have added STD vapor corrosion inhibitor. When STD molecules evaporate into a confined space, they will form a protective barrier on the metal surface, thereby better protecting the metal.
Main advantages
1. Mainly used for rust prevention of black and copper and aluminum metal surfaces.
2. It can dry quickly, will not leave too much residue on the metal surface, and will not cause a lot of pollution to the working environment.
3. Low viscosity, strong permeability and rust resistance, can be used for small hardware parts.
4. The indoor rust prevention period is about 6-12 months.
5. Easy to clean, a transparent oily film is formed on the metal surface, which can be easily washed off with petroleum solvent or kerosene.
6. Easy to operate, spray, paint, brush, and immerse.
Main technical data
| Oil type | Oil solubility |
| Appearance | Brown transparent liquid |
| Viscosity (40℃.CST) | 1.8 |
| Oil film thickness | 1-2um |
| Specific gravity (15/4℃) | 0.715 |
| Flash point (℃) | 46 |
| Flow point (℃) | -40 |
| Performance | |
| Salt spray test (JISK-2246-5.35) 45# steel 12h / cast iron 12h A pole (rust-free) | |
| Wet heat test (JISK-2246 5.34) 120hr A grade (rust-free) | |
(The above values are representative values. Not oil specification values)
Packaging and storage
20L/200L barrels are sealed and stored in a cool, dry, clean, and ventilated warehouse at room temperature.
Usage and method
1. The metal must be cleaned before oiling, and there must be no stains and moisture on the surface;
2. It can be used by immersion, spraying, and painting. The metal surface must be oiled. For workpieces with complex shapes, immersion is recommended as much as possible;
3. Pay attention to proper labor protection during use.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Inquiry
Factory & Shipment
