Standard Building Materials Powder Coating
We are a manufacturer based in China, specializing in high-quality Standard Building Materials Powder Coating for industrial clients worldwide. Technical support and custom formulation available.
Category：powder Coating | Brand：MT
Introduction
Standard Building Materials Powder Coating is formulated with polyester resin and TGIC curing agent as the main raw materials. It is designed for outdoor building materials and metal products requiring good adhesion, mechanical properties, weather resistance, and resistance to overbaking.
Coating Characteristics
Strong Adhesion
Good adhesion to properly prepared substrates.
Mechanical Performance
Excellent mechanical properties and a tough coating film.
Smooth Finish
Forms a smooth, uniform coating surface.
Outdoor Durability
Good outdoor weather resistance and resistance to overbaking.
Applications
Suitable for a wide range of outdoor building materials and metal products, including:
Outdoor lighting
Beach chairs
Solar water heaters
Outdoor air conditioning units
Aluminum curtain walls
Door and window frames
Ceilings
Highway guardrails
Fences
Sports facilities
Communication equipment
Other outdoor metal products
Application Parameters
| Parameter | Recommended Specification |
|---|---|
| Curing Conditions | 200°C × 10–15 minutes |
| Recommended Film Thickness | 60–80 μm |
| Spraying Method | High-voltage electrostatic spraying |
| Recommended Voltage | 60–80 kV |
Standard Test Methods and Test Conditions
The laboratory tests were conducted using 0.8 mm cold-rolled steel plates after oil and rust removal. The coating film thickness was 40–80 μm. Performance indicators may vary slightly depending on the coating gloss.
Environmental Compliance
According to the product information provided, this powder coating does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, or other listed heavy metals, and it meets RoHS requirements.
Storage Conditions
Store the powder in a dry, well-ventilated indoor environment at approximately 35°C, away from direct sunlight. Under the stated conditions, the powder can be stored for 12 months. Products beyond the stated storage period may be used only after re-examination confirms that they remain in suitable condition.
Product Performance Disclaimer
All test indicators stated in this report are based on laboratory test results and are provided for reference only. They do not constitute a performance guarantee for specific applications. Actual results may vary depending on environmental factors, substrate preparation, application conditions, curing conditions, and other variables.
Contact our team for more information about Standard Building Materials Powder Coating, product specifications, color options, and application requirements. As a powder coating manufacturer, we can discuss product selection and customization based on your project needs.
Inquiry
We'll reply within 24 hours
