Colors & Finish

Silver Metallic is a bright silver metallic. This color is a polyester metallic powder coat and has a semi-gloss finish.

Description：

SMOOTH: “Bright Silver” High Gloss Powder Coating.

INTERIOR & EXTERIOR: Superior protection against corrosion in “Bright Silver” PPC Code PS-0135-H.

VERSATILITY: “Bright Silver” PPC Code PS-0135-H powder coating can be applied to various alloy substrates.

SAFE TO USE: “Bright Silver” PPC Code PS-0135-H powder coating is nontoxic.

PRODUCT PROPERTIES: PS-0135-H Polyester, Powder Coating, Cure Schedule: 10 Minutes @400°F or 15 Minutes @ 374°F, Pass Gloss 60°: 85+, Coating Properties for “Bright Silver” PPC Code PS-0135-H Polyester, Impact Direct: 80 in-lbs – Pass Impact Reverse: 80 in-lbs – Pass Gloss 60°: 0-20 Thickness: 2.5-3.5 mils Pencil Hardness: 2H.

Instructions:

Instructions:
Gun to Component Distance	15-30CM
Curing Temperature	180-200℃,10 min-15 min
Coverage:	1/2 lb. of powder is approximately 10-20 sq. ft.

HYPER SILVER：

A clear coat is required for this color. Use our 600 Clear for a darker finish like you see in some of the sample pictures.

* This color must be fully cured 100% before clear coating, in order to avoid darkening/graying of the final color.

POLYESTER

COLOR DESCRIPTION = A REFLECTIVE HYPER SILVER.

SURFACE = SMOOTH METALLIC

CURE TIME = 350F/15 MIN @ PMT (PART METAL TEMPERATURE)

GLOSS LEVEL = 95% (HIGH GLOSS)

SPECIFIC GRAVITY = 1.53

THEORETICAL COVERAGE = 63.14 SQ. FT/LB

SALT SPRAY RESULTS = 1,000+ HRS

Storage stability:

Store in ventilated, dry, clean room, temperature < 25℃

Away from direct sunlight, fire, heat

For best performance, use within 6 months

Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between conventional liquid paint and powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form.

The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a “skin”. So it is nontoxic and widely used in various fields.

Powder coating is a very durable method of providing a decorative finish to metals and a range of other materials. It offers many advantages over other finishes including:

Corrosion resistance.

Powder coating can be applied to most metal components including steel, Zinc, brass and aluminum.

The durable finish provides a surface finish which is less prone to chipping, marking and scratching.

Powder coating can be applied to components used internally and externally.

Low cost

Contains no environmentally harmful solvents

If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.