Reverse Osmosis Membrane Flocculant STD-403
We are a manufacturer based in China. We specialize in providing high-quality Reverse Osmosis Membrane Flocculant STD-403 for industrial clients across various sectors. Whether you need chemicals consultation or technical support, our team is here to help.
Category：Petro Chemicals Brand：STD /MOQ:100KG /From China/ B2B only.
Introduction
Performance and use
Reverse osmosis flocculant STD-403 is a high-efficiency liquid flocculant, mainly used in reverse osmosis pretreatment system; added to the front end of the multi-media filter, it has a significant effect on reducing the SDI value of reverse osmosis influent, especially for surface water with high organic matter content.
It is suitable for a wide range of pH values in water, has a fast coagulation speed, has a large and solid coagulation density, and has good sedimentation properties.
STD membrane flocculant can increase the solid-liquid separation speed and extend the filter working cycle during direct filtration.
Miscible with water in any proportion.
Technical indicators
| Item | Indicators |
| Appearance | Colorless to light yellow liquid |
| PH(1%) | 3.0-5.0 |
| Specific gravity (20℃ g/cm3) | ≥1.10 |
How to use
STD-403 must be added at the front end of the multi-media filter to achieve flocculation and sedimentation.
The product works better in water with high pH value; the product has no special requirements for dosing system and materials.
Dosage Instructions
Usually the dilution ratio is required to be less than 10 times, or the reverse osmosis flocculant is added in the original solution. This depends on the configuration of the dosing system. Before dosing, please consult with STD technicians.
The technicians recommend the appropriate dosage according to the water quality and process characteristics, and obtain better results through on-site debugging. The general dosage is 3-9ppm.
The addition point of the agent should be selected far away from the filter inlet (5.0-7.0 meters), and the injection point should be selected in the center of the water flow pipe, so as to ensure uniform mixing of the agent when the water is turbulent.
Packaging and storage
Packaged in plastic barrels, 25kg or 20kg/barrel.
The physical and chemical properties of STD membrane flocculant are stable. It can be stored in a cool place with a storage period of 1 year.
Safety and protection
STD-403 is weakly acidic. Pay attention to labor protection during operation to avoid contact between the flocculant and skin, eyes, etc. Rinse with plenty of water after contact.
20+ years export experience. If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon.
Inquiry
Factory & Shipment
