Special Chemical Materials

Introduction

STD KBResin8510 is composed of epoxy resin (Component A), modified curing agent (Component B), and catalyst (Component C), specifically designed for pultrusion processes. It features low viscosity, long pot life, excellent processability, rapid curing at appropriate temperatures, outstanding mechanical properties, strong fiber adhesion, and recyclability through degradation.

Applications

Pultruded pipes, rods, and profiles of various cross-sectional shapes and sizes

Composite products manufactured by other pultrusion processes

Typical Physical Properties of Components (Pre-Curing)

Component	Component A	Component B	Component C
Appearance	Colorless or pale yellow liquid	Colorless or pale yellow liquid	Colorless or pale yellow liquid
Viscosity (25℃)/mPa·s	11,000-14,000	25-100	150-300
Mixed Viscosity (25℃)/mPa·s	500-800	500-800	500-800
Density/g*cm⁻³	1.15-1.25	1.15-1.25	0.95-1.05

Mixing Ratio

Component	Component A	Component B	Component C
Weight Ratio	100	85	15

Cured Material Properties

Property	Value
Tensile Strength/MPa	75
Tensile Modulus/MPa	3,000
Tensile Elongation at Break	≥5%
Flexural Strength/MPa	120
Flexural Modulus/MPa	3,000
Glass Transition Temperature/℃	121
Volume Shrinkage/%	<5
Linear Shrinkage/%	<0.6
Water Absorption (24h/7d, 23℃)/%	<0.4

*Data represents typical cured properties, not product specifications. Curing regime: 100℃/0.5h + 200℃/0.5h.

Pultrusion Temperature Zones

Zone	Temperature/℃
Zone 1	180±5
Zone 2	195±5
Zone 3	195±5
Line Speed/m/min	0.5

Gel Time

Temperature/℃	Gel Time/s
120	360-460
150	70-130
160	45-80
180	25-35
200	10-20

Packaging

25Kg, 200Kg, 1000Kg

Storage Conditions & Shelf Life

Store in a cool, dry, and clean environment.

Reseal immediately after use.

Shelf life: 24 months in original packaging under proper storage conditions.

Personal Protection

Category	Requirement
PPE	Wear impermeable protective gloves to avoid skin contact.
Respiratory Protection	No special protection required.
Eye Protection	Chemical splash goggles recommended.
Body Protection	Use protective clothing resistant to this product. Equip with safety boots, gloves, eyewash stations, and emergency showers as needed.

First Aid Treatment

Skin Contact

Wash thoroughly with soap and water for 5 minutes or until contaminants are removed.

Eye Contact

Lift eyelids and rinse eyes with flowing water or saline solution for 20 minutes.

Seek immediate medical attention.

Inhalation

Move to fresh air immediately.

Consult a physician if symptoms persist.

If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.