Powder Coatings for Fitness Equipment
We are a manufacturer based in China. We specialize in providing high-quality Powder Coatings for Fitness Equipment for industrial clients across various sectors. Whether you need chemicals consultation or technical support, our team is here to help.
Category：Paint chemicals Own Brand：MT /MOQ:100KG /From China/ B2B only.
Introduction
Features:
Great adhesion and mechanical properties;
Great flexibility and anti-scratching;
Chemical resistance and anti-corrosion
Powder Coatings for Fitness Equipment: Technical Overview
| Category | Specifications |
|---|---|
| Definition | Durable, wear-resistant powder coatings designed for high-traffic fitness equipment |
| Key Requirements | Sweat resistance, abrasion protection, antimicrobial properties |
Coating Type Comparison
| Type | Advantages | Limitations | Best Applications |
|---|---|---|---|
| Epoxy-Polyester Hybrid | High durability Cost-effective |
Moderate UV resistance | Weight machines Gym racks |
| Polyurethane | Excellent wear resistance Easy cleaning |
Higher cost | Treadmill frames Ellipticals |
| Antimicrobial Formulation | Bacteria inhibition Hygienic surface |
Limited color options | Handles Touch points |
| Textured Finish | Enhanced grip Scratch masking |
Reduced gloss | Dumbbells Kettlebells |
Surface Preparation
| Process | Parameters | Purpose |
|---|---|---|
| Alkaline Cleaning | pH 11-13. 55-65°C | Remove oils/sweat residues |
| Iron Phosphate | 35-45°C × 3-5 min | Improve corrosion resistance |
| Sandblasting | 80-100 grit aluminum oxide | Surface profiling |
| DI Water Rinse | <30 μS conductivity | Prevent contamination |
Application Specifications
| Parameter | Requirements | Equipment |
|---|---|---|
| Film Thickness | 60-90 μm | Eddy current gauge |
| Curing Schedule | 180°C × 10-15 min | Convection oven |
| Pretreatment | 5-stage system | Automated line |
| Color Matching | ΔE<0.8 tolerance | Spectrophotometer |
Performance Standards
| Test | Requirement | Method |
|---|---|---|
| Salt Spray | 750h (ASTM B117) | No corrosion |
| Abrasion Resistance | 500 cycles (CS-10) | ASTM D4060 |
| Sweat Resistance | 1000h immersion (pH 4.5-8) | ISO 105-E04 |
| Impact Resistance | 120 in-lb direct | ASTM D2794 |
Special Features
| Feature | Technical Solution | Benefit |
|---|---|---|
| Anti-Slip | Textured additives (30-70μm) | Safe workout surface |
| Fingerprint Resistance | Special wax additives | Maintains clean appearance |
| Color Coding | Pre-matched RAL colors | Equipment identification |
| Quick Cure | 160°C formulations | Energy savings |
Maintenance Guidelines
| Cleaning Method | Frequency | Recommended Practice |
|---|---|---|
| Disinfectant Wipes | After each use | Alcohol-based (<70%) |
| Deep Cleaning | Weekly | Neutral pH cleaners |
| Abrasive Cleaners | Avoid | Prevent gloss reduction |
| Wax Application | Quarterly | Silicone-free formulas |
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Inquiry
Factory & Shipment
