Powder coating for fitness equipment
We are a manufacturer based in China. We specialize in providing high-quality Powder coating for fitness equipment for industrial clients across various sectors. Whether you need chemicals consultation or technical support, our team is here to help.
Category：powder Coating Own Brand：MT /MOQ:100KG /From China/ B2B only.
Introduction
Product description
Powder coating for fitness equipment has an excellent decorative appearance, and the coating film has excellent corrosion resistance, wear resistance, good flexibility and other excellent properties.
Transportation packaging
Carton packaging, lined with two layers of PVC plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be avoided from direct sunlight, moisture and heat, and contact with chemicals.
Application areas
Fitness equipment.
Health and safety
Operators should wear dust masks during use to avoid inhaling dust, and minimize long-term contact between skin and powder coating. The coating attached to the skin can be washed with soap.
Coating properties
| Test items | Inspection index | Inspection standard or method |
| Appearance | Visual inspection | Flat and smooth, slight orange peel is allowed |
| Gloss (60°) | GB/T 9754 | Agreed |
| Film thickness | GB/T 1764 | ≥60 μm |
| Adhesion | GB/T 9286 | Level 0 |
| Surface hardness | GB/T 6739 | ≥H |
| Neutral salt spray resistance | GB/T 1771 | 500h; scribed area: unidirectional rust ≤2.0mm; unscribed area: no abnormality |
| Impact | GB/T 1732 | 50Kg·cm, positive and negative pass |
| Cupping | GB/T 9753 | ≥6mm |
| Bending | GB/T 6742 | ≤2mm |
| Curing conditions | 180℃/15min | |
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Inquiry
Factory & Shipment
