Powder coating for elevators
We are a manufacturer based in China, specializing in high-quality Powder coating for elevators for industrial clients worldwide. Technical support and custom formulation available.
Category：powder Coating | Brand：MT
Introduction
Overview
Powder coating for elevators is designed for metal components such as elevator doors, door frames, car walls, ceilings, and related parts. It offers good leveling, mechanical performance, and salt spray resistance, helping provide a consistent finish for interior elevator components and other coated metal surfaces.
As a powder coating manufacturer, we support B2B customers with product selection and customized coating solutions based on substrate, finish, color, and application requirements.
Key Features
Excellent Leveling
Helps create a smooth, even finish on elevator panels and metal components.
Mechanical Performance
Designed to provide suitable adhesion, hardness, impact resistance, and flexibility when applied under appropriate conditions.
Salt Spray Resistance
Provides corrosion protection for coated metal surfaces, subject to substrate preparation and the specified coating system.
Applications
Elevator Doors
Landing doors, car doors, and associated metal door components.
Elevator Interiors
Car walls, ceilings, and interior decorative metal panels.
Frames and Components
Elevator door frames and other compatible coated metal parts.
Application Parameters
| Parameter | Recommended Value |
|---|---|
| Curing Conditions | 180–200°C for 10–15 minutes |
| Application Method | High-voltage electrostatic spraying |
| Spraying Voltage | 60–80 kV |
| Recommended Film Thickness | 60–150 μm |
Note: Confirm the curing schedule with the product’s technical data sheet. Curing time should be measured after the workpiece reaches the specified temperature. Actual results may vary with substrate, film thickness, equipment, and application conditions.
Coating Performance
The following results are based on the supplied product test data. They should be treated as reference values for the tested coating system rather than a guarantee for every substrate, color, film thickness, or application condition.
| Test Item | Test Equipment / Method | Reported Result | Test Standard |
|---|---|---|---|
| Adhesion | Single-edge knife and adhesive tape | Grade 0 | GB/T 9286 |
| Impact Resistance | Impact tester | 50 kg·cm passed | GB/T 1732 |
| Coating Hardness | Hardness tester | ≥ H | GB/T 6739 |
| Solvent Resistance | Anhydrous ethanol and cloth | No scratches or discoloration after 20 wipes | Not specified |
| Alkali Resistance | 0.1 N NaOH solution | ≥ 48 h; no blistering, peeling, rust, or spots reported | GB/T 9274 |
| Water Resistance | Distilled water immersion | ≥ 240 h; no blistering, peeling, rust, or spots reported | GB/T 1733 |
| Acid Resistance | 0.1 N sulfuric acid solution | ≥ 48 h; no blistering, peeling, rust, or spots reported | GB/T 9274 |
| Neutral Salt Spray | Salt spray test chamber | ≥ 240 h; reported rusting and blistering below 2 mm | GB/T 1771 |
| Flexibility | Bending tester | No cracking or peeling around a 2 mm mandrel | GB/T 1731 |
| Artificial Aging Resistance | Artificial aging test chamber | ≥ 480 h; gloss loss and discoloration each below one grade; other reported ratings at grade 0 | Method 1 of GB/T 1865 |
Test data are provided for technical reference. Please confirm the test methods, rating criteria, specimen preparation, and applicable standard editions against the original laboratory reports before using these values in specifications or compliance documents.
Customized Powder Coating Solutions
Elevator manufacturers and component suppliers may require different colors, gloss levels, surface finishes, film thicknesses, and performance characteristics. We can discuss customized powder coating options according to your substrate, production process, appearance requirements, and target application.
Color Matching
Discuss standard or custom colors for your elevator product range.
Finish Selection
Specify the required gloss level and surface appearance.
Technical Support
Share substrate details and curing conditions to help identify a suitable coating grade.
Contact our team with your required color, finish, substrate, estimated order quantity, and performance requirements to discuss product selection, customization, and sample availability.
Inquiry
We'll reply within 24 hours
