Powder coating for elevators
We are a manufacturer based in China, specializing in high-quality Powder coating for elevators for industrial clients worldwide. Technical support and custom formulation available.
Category：powder Coating | Brand：MT
Introduction
Powder coating for elevators is designed for elevator accessories and metal components that require an attractive decorative finish. It offers good adhesion, toughness, corrosion resistance, and chemical resistance, making it suitable for a range of elevator applications. The coating system should be selected according to the substrate, required appearance, and service environment.
Key Features
Decorative Finish
Designed to provide a uniform coating appearance for visible elevator components.
Corrosion Resistance
Helps protect coated metal surfaces when the substrate is properly prepared and the coating is correctly applied.
Adhesion and Toughness
Formulated to provide coating adhesion and mechanical performance suitable for the intended application.
Application Areas
Elevator Doors and Frames
Metal door panels, frames, and associated components.
Elevator Interiors
Car walls, ceilings, and decorative metal parts.
Elevator Accessories
Other compatible elevator devices and metal accessories requiring a decorative finish.
Coating Properties
The following values are based on the supplied product information and should be verified against the applicable technical data sheet and test reports.
| Test Item | Inspection Indicator / Standard | Reported Requirement |
|---|---|---|
| Appearance | Visual inspection | Uniform coating, without burrs, bubbles, or similar visible defects |
| Film Thickness | GB/T 1764 | ≥ 60 μm |
| Adhesion | GB/T 9286 | Grade 0 |
| Impact Resistance | GB/T 1732 | ≥ 50 kg·cm |
| Neutral Salt Spray Resistance | GB/T 1771 | 500 h; unilateral corrosion at the scribe line ≤ 2.0 mm; no abnormality in the unscribed area |
| Acid Resistance | GB/T 9274 | 300 h; no smearing or spots; slight discoloration permitted |
| Alkali Resistance | GB/T 9274 | 200 h; no smearing; slight discoloration permitted |
| Bending | GB/T 6742 | ≤ 3 mm |
| Moisture and Heat Resistance | GB/T 1740 | 500 h; no abnormality |
| Alcohol Wiping Resistance | GB/T 23989 | 50 back-and-forth wiping cycles without obvious discoloration or blistering |
| Curing Conditions | Product-specific curing schedule | 180°C for 15 minutes |
Note: Test results depend on specimen preparation, substrate, pretreatment, coating thickness, curing conditions, and evaluation criteria. Confirm the original test reports and applicable standard editions before using these values as contractual specifications.
Transportation and Packaging
The powder coating is packed in cartons lined with two layers of polyvinyl chloride (PVC) bags, with a net weight of 20 kg per carton. It is classified as non-dangerous goods according to the supplied product information and can be transported by suitable means.
During transportation, protect the packages from direct sunlight, moisture, excessive heat, and contact with chemicals. Follow the product’s current safety data sheet and applicable transport requirements.
Health and Safety
Operators should wear a suitable dust mask or respirator and other appropriate personal protective equipment to minimize inhalation of airborne powder and prolonged skin contact. Provide adequate ventilation and follow the product’s safety data sheet. If powder contacts the skin, wash the affected area with soap and water.
Looking for powder coating for elevator doors, frames, or interior components? Send us your required color, finish, substrate, estimated quantity, and application details. Our team can help you evaluate suitable coating options for your production requirements.
Inquiry
We'll reply within 24 hours
