Nano plate-SA850 Product Specification
We are a manufacturer based in China. We specialize in providing high-quality Nano plate-SA850 Product Specification for industrial clients across various sectors. Whether you need chemicals consultation or technical support, our team is here to help.
Category：Electronic Adhesive Own Brand：MT /MOQ:100KG /From China/ B2B only.
Introduction
SA850/PA-9001adhesive
The product is a solvent-based two-component adhesive that needs to be used with hardener PA-9001. It mainly bond with various membrane materials, membrane and aluminum materials and has high peel strength and boiling resistance.
1. Basic data
| Item | SA850（Adheisve） | PA-9001（Hardener） |
| Solid content(%) | 50±2 | 100% |
| Solvent | Ethyl acetate | None |
| Rotational viscosity（25℃ mpa.s） | 50-200 | 1750-3250 |
| Mix ratio | 100 | 6.5 |
2.Application precess
1. Dilution: it is recommended to mix the hardener and the solvent evenly before add the addhesive. Stirring time should not be less than 5 minutes.
2. Dry coating weight：Suggested coating dry weight 5-5.5g/m2
3. Drying temperature：Suggested drying temperature 80-100℃，according to the drying situation;
4. Compound temperature：Suggested compound temperature 40-60℃;
5. Curing condition：Suggested curing temperature 50-60℃，curing time 2-3 days.
Notice
1. Avoid moisture and keep dry;
2. It is recommended to use up the ingredients within 2-4 hoursafter stirring.
3. The diluent can be ethyl acetate or butanone with moisture content of no more than 0.2%; ethanol and other alcohol solvents with active hydrogen cannot be used.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Inquiry
Factory & Shipment
