N-Methylaniline
We are a manufacturer based in China. We specialize in providing high-quality N-Methylaniline for industrial clients across various sectors. Whether you need chemicals consultation or technical support, our team is here to help.
Category：Paint chemicals Own Brand：MT /MOQ:100KG /From China/ B2B only.
Introduction
CAS No. 100-61-8
Content 99%
Packing 200kg/drum 1000kg/IBC
Names and Identifiers
| Name | Monomethylaniline |
| Synonyms | methyl aniline anilinomethane N-METHYLANILINE N-Methylaniline 2-methylaniline MONOMETHYLANILINE N-dimethylaniline Monomethylaniline methylphenylamine N-MONOMETHYLANILINE Methylaniline,mixed N-phenylmethylamine N-Monomethylaniline N-Methylbenzeneamine N-METHYLAMINOBENZENE (Methylamino)benzene N-Methyl-phenylamine N-methylaminobenzene (methylamino) benzene Benzenamine, N-methyl- Benzenenamine, N-methyl- methylaniline(non-specificname) Methylaniline(non-specificname) |
| CAS | 100-61-8 |
| EINECS | 202-870-9 |
| InChI | InChI=1/C7H9N/c1-6-4-2-3-5-7(6)8/h2-5H,8H2,1H3 |
| InChIKey | AFBPFSWMIHJQDM-UHFFFAOYSA-N |
100-61-8 – Physico-chemical Properties
| Molecular Formula | C7H9N |
| Molar Mass | 107.15 |
| Density | 0.989 g/mL at 25 °C (lit.) |
| Melting Point | -57 °C (lit.) |
| Boling Point | 196 °C (lit.) |
| Flash Point | 174°F |
| Water Solubility | 30 g/L |
| Solubility | water: slightly soluble30g/L |
| Vapor Presure | 0.5 hPa (20 °C) |
| Appearance | Liquid |
| Color | Clear yellow to brown |
| Odor | Moderate aniline-type. |
| Exposure Limit | NIOSH REL: TWA 0.5 ppm (2 mg/m3), IDLH 100 ppm; OSHA PEL: TWA 2ppm (9 mg/m3); ACGIH TLV: TWA 0.5 ppm (adopted). |
| Merck | 14,6019 |
| BRN | 741982 |
| pKa | 4.84(at 25℃) |
| PH | 7.6 (1g/l, H2O, 20℃) |
| Storage Condition | Store below +30°C. |
| Stability | Stability Combustible. Incompatible with strong oxidizing agents. Discolours upon exposure to air. |
| Sensitive | Air Sensitive |
| Refractive Index | n20/D 1.571(lit.) |
| Physical and Chemical Properties | Colorless to red-brown oily flammable liquid. melting point -57 ℃ boiling point 196.25 ℃ relative density 0.9891 refractive index 1.5684 solubility: slightly soluble in water, soluble in ethanol, ether, chloroform. |
| Use | Used as a dye intermediate |
100-61-8 – Risk and Safety
| Risk Codes | R23/24/25 – Toxic by inhalation, in contact with skin and if swallowed. R33 – Danger of cumulative effects R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | S28 – After contact with skin, wash immediately with plenty of soap-suds. S36/37 – Wear suitable protective clothing and gloves. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S60 – This material and its container must be disposed of as hazardous waste. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. S28A – |
| UN IDs | UN 2294 6.1/PG 3 |
| WGK Germany | 3 |
| RTECS | BY4550000 |
| FLUKA BRAND F CODES | 8 |
| TSCA | Yes |
| HS Code | 29214200 |
| Hazard Class | 6.1 |
| Packing Group | III |
| Toxicity | LD in rabbits (g/kg): 0.28 orally; in rabbits, cats (mg/kg): 24, 24 i.v. (Treon) |
100-61-8 – Upstream Downstream Industry
| Raw Materials | Aniline Methyl alcohol |
| Downstream Products | 1,3-dimethyl-1,3-diphenylurea N-benzyl-N-methylaniline 2-(N-methylanilino)ethanol Buprofezin |
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Inquiry
Factory & Shipment
