HSA-720 (FASIVE-720) Single-Component Adhesive for High-End Laminating and Heat Transfer Applications
We are a manufacturer based in China, specializing in high-quality HSA-720 (FASIVE-720) Single-Component Adhesive for High-End Laminating and Heat Transfer Applications for industrial clients worldwide. Technical support and custom formulation available.
Category：Coating materials | Brand：MT
Factory Direct
7-30 Days Lead Time
MOQ: 100KG
Global Export
Introduction
| Category | Information |
|---|---|
| Product Name | HSA-720 (FASIVE-720) Single-Component Adhesive for High-End Laminating and Heat Transfer Applications |
| Main Purpose | FASIVE-720 is a single-component adhesive for hot stamping on printed materials and plastic products. |
| Product Features | – Excellent adhesion to rough surfaces of pre-treated and untreated paper, as well as various composite surfaces.<br>- Excellent adhesion to OPP and cellulose acetate composite papers.<br>- Good adhesion to printed, unprinted, dyed, and composite papers, coated materials, smooth surfaces, and some plastics like PP, PS, ABS, PVC.<br>- Excellent hot stamping performance and good shear properties.<br>- Good coverage with no voids. |
| Physical Properties | – Appearance: Yellow transparent liquid<br>- Solid Content (N.V %): 40%<br>- Formulation:<br> FASIVE-720: 50<br> Diluent: 50 (Composition: Methyl ethyl ketone (MEK): Toluene = 1:1)<br> Silica powder (F-100): 3 (15% of resin solids)<br>- Mixing Note: Mix the above ingredients using a high-speed disperser for more than 15 minutes to ensure uniform resin mixing.<br>- Coating and Dilution Temperature: 20~30℃<br>- Storage Conditions: Above 5℃ in winter, below 30℃ in summer |
| Coating Process | – Anilox Roll: 40L (Approximately 100 mesh)<br>- Dry Coating Weight: 1.8~2.0 g/m²<br>- Drying Oven Temperature: 110~120℃ for 10~15 seconds<br>- Humidification: Adding a small amount of water vapor to the coating surface can improve quality.<br>- Doctor Blade: 500 rpm, counter-rotation, in contact with the coating surface |
| Hot Stamping Conditions | Approximately 95-105℃/0.4 seconds on vertical and flat-bed hot stamping machines. |
| Stability | Sealed packaging, can be stored for at least 6 months in a cool and dry environment. |
| Packaging | 24 kg/barrel |
| Notes | – The above data is for reference only and can be adjusted according to actual conditions on site.<br>- Shake the adhesive evenly before use. |
Inquiry
We'll reply within 24 hours
Or contact us directly:
