High-Temperature Insulating Paint STD7502
We are a manufacturer based in China. We specialize in providing high-quality High-Temperature Insulating Paint STD7502 for industrial clients across various sectors. Whether you need chemicals consultation or technical support, our team is here to help.
Category：Functional additives Own Brand：MT /MOQ:100KG /From China/ B2B only.
Introduction
Product Introduction
STD7502 is an inorganic silicone one-component high-temperature resistant insulating paint. It can cure at room temperature or under heating conditions, exhibits excellent adhesion to metals, polymers, glass, and other materials. After curing, it can withstand long-term use at 1200°C and a maximum temperature of 1800°C. It can be used as a primer, intermediate coat, or topcoat in atmospheric environments and is suitable for almost all metals (no additional treatments such as sandblasting required).
Characteristics & Applications
Characteristics:
Excellent flexibility
Superior adhesion
High-temperature and oxidation resistance
Applications:
Enameled wires
High-temperature corrosion protection in nuclear power plants
Encapsulation
Instructions
Curing process: 1-3 days at room temperature (depending on temperature/humidity), 80°C/2h, 200°C/1h, or 250°C/20min (customizable).
This substance is highly sensitive to moisture, oxygen, and carbon dioxide. Prolonged exposure may cause product deterioration. After opening, flush with N2/Ar and store at low temperature to extend shelf life.
Technical Parameters
| Appearance | Colorless or pale yellow liquid |
| Viscosity (25°C) | 20-40 cPs |
| Density | 0.95-1.15 g/cm³ |
Packaging
1kg, 5kg, 200kg
Storage Conditions & Shelf Life
Must be stored in a cool, dry, and clean environment.
24 months unopened (<5°C).
Personal Protection
| Personal Protective Equipment | Protective impermeable gloves to avoid skin contact. |
| Respiratory Protection | No special protection required. |
| Eye Protection | Chemical splash goggles recommended. |
| Body Protection | Use protective clothing resistant to this product. Equip with boots, gloves, eyewash stations, and emergency showers as needed. |
First Aid
Skin Contact
Rinse thoroughly with soap and water for 5 minutes or until contaminants are removed.
Eye Contact
Lift eyelids and rinse with running water or saline for 20 minutes.
Seek immediate medical attention.
Inhalation
Move to fresh air immediately.
Seek medical help if symptoms persist.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Inquiry
Factory & Shipment
