FALAC-PW2 Powder Foil Coating for PS and ABS Plastics
We are a manufacturer based in China, specializing in high-quality FALAC-PW2 Powder Foil Coating for PS and ABS Plastics for industrial clients worldwide. Technical support and custom formulation available.
Category：Coating materials | Brand：MT
Factory Direct
7-30 Days Lead Time
MOQ: 100KG
Global Export
Introduction
| Category | Information |
|---|---|
| Product Name | FALAC-PW2 Powder Foil Coating for PS and ABS Plastics |
| Main Purpose | FALAC-PW2 is a single-component coating specifically designed for powder foil used in printing on PS and ABS plastics. |
| Product Features | – Suitable for fine lines and medium to small area hot stamping.<br>- Ideal for hot stamping on the surface of stationery made from PS, ABS, and other materials.<br>- Excellent wear resistance.<br>- Excellent hot stamping performance with moderate release. |
| Physical Properties | – Appearance: White paste<br>- Solid Content (N.V %): 60-65% (150℃ × 30min)<br>- Dilution and Cleaning Solvent: Main agent (FALAC-PW2): n-Butyl acetate = 5:1<br>- Coating and Dilution Temperature: 20~30℃<br>- Storage Conditions: Above 5℃ in winter, below 30℃ in summer |
| Coating Process | – Anilox Roll: Approximately 100 mesh<br>- Dry Coating Weight:<br> First coat: 5~6 g/m²<br> Second coat: 10~12 g/m²<br>- Drying Oven Temperature: 120~130℃ for 15~20 seconds<br>- Coating Speed: 60~80 m/min<br>- Release Requirements: Can be directly coated on the surface of PET film. An additional release layer of OPWAX or water wax can be added to the PET film surface if needed. |
| Stability | Sealed packaging, can be stored for at least 6 months in a cool and dry environment. |
| Packaging | 18 kg/barrel |
| Notes | – The above data is for reference only and can be adjusted according to actual conditions on site.<br>- Shake the coating evenly before use. |
Inquiry
We'll reply within 24 hours
Or contact us directly:
