Functional additives

Introduction

STD7361 is a high-temperature or humidity-cured adhesive. After curing, the product has excellent bonding strength to commonly used metals, plastics, ceramics, composite materials and other substrates in the market. The product has excellent properties such as high temperature resistance and strong bonding strength, and can be widely used in metal bonding in high temperature environments. The product can be used for dispensing with high temperature requirements, bonding with lower thickness, filling and sealing.
Characteristics & Parameters

Performance before curing	Data
Appearance	White viscous fluid
Viscosity @25℃	15,000~22,000cps
Storage conditions	Sealed and low-temperature storage
Shelf life	6 months

 

Curing Properties

Curing performanceCuring method

Parameters	Method
Curing temperature	<1mm,150~180℃ drying for 15~30 minutes
1mm~3mm,180~200℃ drying for 60 minutes
Curing method	High-temperature curing (isolating open flame) 250℃, 1 hour

Performance after curing

Parameters	Value
High temperature resistance	>800℃
Salt spray resistance	2400hrs, OK
QUV aging	3000hrs, OK

 

Surface treatment

Before coating, clean the surface of the substrate with a solution, and then coat after drying. Ensure good contact, and then cure the sample according to the curing conditions.
Others

Storage:

The product can be stored for 6 months at 0~5℃ if unopened. After opening, please use it within 3 days.

 

Product operation instructions:

Please work in a well-ventilated environment and wear protective gloves, masks, and goggles during construction. Avoid fire sources and prevent liquid from contacting the skin. After the construction is completed, quickly clean the tools with solvents such as acetone and ethyl acetate. Failure to clean will cause curing film and damage to equipment and facilities.

 

Packaging specifications:

According to customer requirements, packaging specifications of 20kg, 5kg or customization can be provided. For details, please refer to our standard packaging data or contact your local customer service representative.

 

Warranty:

Replace any defective materials found. Due to storage, handling, and application of this material beyond our control, we assume no responsibility for the results obtained.

 

Precautions:

The following terms replace any terms in your company’s forms, letters, and documents. KUBERD makes no warranty, express or implied, including warranties of merchantability or fitness for a particular purpose, and shall not be liable for any incidental, consequential, or other damages resulting from the use or handling of this product, whether under theories of negligence, strict liability, or otherwise. Any statements or suggestions contained in product literature should not, in any way, be construed as inducements to infringe any relevant patents, whether now or hereafter. In any event, KUBERD’s sole responsibility for any claim arising out of the manufacture, use, or sale of its product shall be to refund the purchase price paid by the buyer of the product, provided the product has been shown to be reasonable in STD’s sole judgment.

If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.