Electrical Insulation Powder Coatings
We are a manufacturer based in China, specializing in high-quality Electrical Insulation Powder Coatings for industrial clients worldwide. Technical support and custom formulation available.
Category：powder Coating | Brand：MT
Factory Direct
7-30 Days Lead Time
MOQ: 100KG
Global Export
Introduction
Feature:
|
Granularity |
100~200μm>=70%
260μm<=0.5% |
External appearance |
flat and smooth, slight orange peel is allowed |
|
Edge coverage rate |
>=30% |
Impact strength |
>=50kg.cm |
|
Adhesion(cross-cut) |
<=2 grade |
Pencil hardness |
>=H |
|
Flexibility |
<=3mm |
Neutral salt spray |
no obvious change within 500h |
|
Volume resistivity |
>=1×104 Ω.cm |
Electric intensity |
>=30kv/mm |
Field of application:
Mainly used for painting the stators and rator core as groove insulation, especially good for those motor rotors of the automobiles, motorcycles and hair dries.
|
Packing |
Double PP bags, N.W 20kg/carton |
|
Shelf life |
12 month within 30℃,avoid direct sunlight |
|
Health and Safety |
Refer to the MSDS. |
Inquiry
We'll reply within 24 hours
Or contact us directly:
