Dodecyl Trimethyl Ammonium Chloride
We are a manufacturer based in China. We specialize in providing high-quality Dodecyl Trimethyl Ammonium Chloride for industrial clients across various sectors. Whether you need chemicals consultation or technical support, our team is here to help.
Category：Paint chemicals Own Brand：MT /MOQ:100KG /From China/ B2B only.
Introduction
CAS No. 112-00-5
Content 37%
Packing 175kg/drum 900kg/IBC
Names and Identifiers
| Name | Dodecyl trimethyl ammonium chloride |
| Synonyms | LTAC DTAC IPC-DTMA-CL LAURYLTRIMETHYLAMMONIUM CHLORIDE DODECYLTRIMETHYLAMMONIUM CHLORIDE N-DODECYLTRIMETHYLAMMONIUM CHLORIDE Dodecyl trimethyl ammonium chloride N,N,N-Trimethyl-1-dodecanaminium chloride 1-Dodecanaminium,N,N,N-trimethyl-,chloride |
| CAS | 112-00-5 |
| EINECS | 203-927-0 |
| InChI | InChI=1/C15H34N.ClH/c1-5-6-7-8-9-10-11-12-13-14-15-16(2,3)4;/h5-15H2,1-4H3;1H/q+1;/p-1 |
| InChIKey | DDXLVDQZPFLQMZ-UHFFFAOYSA-M |
112-00-5 – Physico-chemical Properties
| Molecular Formula | C15H34ClN |
| Molar Mass | 263.89 |
| Density | 0.9265 (rough estimate) |
| Melting Point | 37 °C |
| Boling Point | 412.12°C (rough estimate) |
| Flash Point | 19°C |
| Water Solubility | Soluble |
| Solubility | Soluble in water, ethanol, acetone and chloroform, insoluble in ether and benzene. |
| Vapor Presure | 0Pa at 25℃ |
| Appearance | White powder or block |
| Color | White to light yellow |
| BRN | 3915951 |
| PH | 4.0 to 7.5(50 g/L, 25 ℃) |
| Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
| Stability | Stable. Incompatible with strong oxidizing agents. Protect from moisture. |
| Sensitive | Hygroscopic |
| Refractive Index | n20/D 1.426 |
| MDL | MFCD00041974 |
| Physical and Chemical Properties | Melting point 237°C water-Soluble Soluble |
| Use | Used as cationic surfactant |
112-00-5 – Risk and Safety
| Risk Codes | R36/37/38 – Irritating to eyes, respiratory system and skin. R50 – Very Toxic to aquatic organisms R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R22 – Harmful if swallowed R67 – Vapors may cause drowsiness and dizziness R11 – Highly Flammable |
| Safety Description | S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. S60 – This material and its container must be disposed of as hazardous waste. S37/39 – Wear suitable gloves and eye/face protection S36 – Wear suitable protective clothing. S16 – Keep away from sources of ignition. |
| UN IDs | UN 3077 9/PG 3 |
| WGK Germany | 3 |
| RTECS | JR2122500 |
| FLUKA BRAND F CODES | 3-10 |
| TSCA | Yes |
| HS Code | 29239000 |
| Hazard Class | 6.1(b) |
| Packing Group | III |
| Toxicity | LD50 orally in Rabbit: 200 – 1000 mg/kg |
Reference Information
| LogP | 1.22 at 25℃ |
| surface tension | 860-1710mN/m at 52.78-105.56g/L and 25 ℃ |
| use | this product is used as an industrial and agricultural fungicide. Antistatic agents for synthetic fibers. When drilling deep wells, it can be used as an emulsifier for anti-high temperature water-in-oil emulsion mud, and can also be used as an anti-sticking agent and release agent for the latex industry. can be used as catalyst, emulsifier, bactericide, disinfectant, antistatic agent, etc. widely used in industrial water treatment as bactericidal and algaecide, etc. can be used as catalyst, emulsifier, bactericide, disinfectant, antistatic agent, etc., as cationic surfactant cationic surfactant, applied to catalyst, emulsifier, disinfectant, germicidal base, antistatic agent, etc. Used as a metal extractant for the separation of rare earth elements and the separation of niobium, antimony and chromium; used as a hemolytic agent in blood sample analysis |
| production method | 430 kg of decyldimethyl tertiary amine is put into a reaction kettle, a certain amount of isopropanol and water are added, and alkali is used as catalyst. after replacing air, the pressure kettle is gradually heated and introduced into 111 kg of methyl chloride, and reacted at a pressure of 0.2~0.3 MPa for 4 hours. After cooling to normal pressure, discharge and fill. |
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Inquiry
Factory & Shipment
