Powder Coating Oven

Industrial Conveyor Ovens can be used for a wide variety of heat processes including drying, curing, aging, annealing, stress relieving, bonding, tempering, preheating and forming. Conveyor ovens are utilized for continuous processing and can easily be incorporated into existing production lines.

There are a number of reasons that make an industrial conveyor oven a good choice for heat processing:

High Production Volumes

Production Automation

Process Flexibility

Applications：

Aerospace

Automotive

Electronics

Adhesive Curing

Paint Curing

Polymer Curing

Product Drying

And so many more.

Conveyor Ovens offer a variety of conveyance configurations：

High process temperatures limit conveyance material options and eventually force drive components (ie: bearings, drive chain and motors) outside the heated zone completely. There are four types of conveyors that are commonly used in heat processing applications; flat wire, woven belt, chain and roller.

In either a horizontal or vertical configuration, the Conveyor Oven offers the ability to handle high production rates. Multi-lane conveyor ovens are also available which allow processing multiple part sizes at varying curing times. Read about a dual-lane curing conveyor oven recently shipped to a parts manufacturer.

Conveyor Oven Conveyance Systems：

Belt Conveyance Systems horizontally convey the parts through the oven on a conveyor belt. A Belt Style Conveyor typically interfaces with a processing line. The oven conveyor belt is set to the line pass height and speed. ITS manufactures both continuous conveyor ovens and indexing conveyor ovens.

Overhead Conveyance Systems feature an I-beam, enclosed track, or power and free conveyor where the part(s) are typically hung from a carrier or rack and travel through the oven in a continuous or indexing mode.

Chain Conveyance Systems convey the product through the oven, in a horizontal or vertical configuration, where the parts or carriers are transported on a single strand or multiple strands of engineered chain.

Powered Roller Conveyance Systems convey the product or pallets horizontally through the oven on powered rollers in a continuous or indexing mode.

Walking Beam Conveyance Systems are typically used in indexing type applications where product spacing is critical or where environmental conditions preclude other conveyance styles. Bearings, drive components, and position sensors are located outside the oven.

Pusher Conveyance Systems feature an internal or external pusher mechanism that indexes the parts through the heat processing chamber. Pusher Conveyance Systems use rollers, low friction rails, or slide beds to support the product through the oven.

Each Industrial Conveyor Oven project undergoes a comprehensive evaluation of every production requirement. The assessment includes areas such as production goals, part configuration and construction, part mass, temperature profile, and facility location or elevation.

Features ：

Up to 1200°F (649°C)

Nema 12 Rated Control Panel

Aluminized Steel Construction

Variety of Belt Options with Variable Speed Controls

Plug-Style Recirculation Fan

Entrance and Exit Conveyor Stops

Heating Safety Equipment

Oven Temperature Controller

Factory tested to ensure on time delivery and field start up.

24/7 factory direct technical service and spare parts group.

Specifications：

Heavy gauge Aluminized Steel：

304, 316 Stainless Steel or other Nickel Alloys for temperature and corrosion resistance

High-Density energy-saving insulation

Panel or can type construction available

Access to the interior of the oven, fan, and heating chamber

Power Source Options：

Main Power Supplies 208 to 690 Volt AC, 50 and 60 HZ

Control Voltage 24 Volt DC or 120/220 Volt AC

Heat Sources：

Electric

LPG

Natural Gas

Fuel Oil

Steam