Bis(2-hydroxyethyl) Oleyl Amine

Paint chemicals 2025-03-24

CAS No. 13127-82-7 25307-17-9

Content 97%

Packing 180kg/drum

13127-82-7 – Names and Identifiers

Name (Z)-2,2′-(octadec-9-enylimino)bisethanol
Synonyms O02
Bis(2- Hydroxyethyl) Oleyl amine
N,N-bis(2-Hydroxyethyl)oleylamine
Oleyl Amine Ethoxylate Ether(2EO)
Oleyl Amine Ethoxylate Ether (15EO)
2′-(9-octadecenylimino)bis-(z)-ethano
2,2′-[(Z)-9-Octadecenylimino]bisethanol
(Z)-2,2′-(octadec-9-enylimino)bisethanol
Ethanol, 2,2-(9Z)-9-octadecenyliminobis-
2,2′-[[(Z)-9-Octadecenyl]imino]bisethanol
2,2′-(9-octadecenylimino)bis-,(Z)-Ethanol
2,2′-[(9Z)-octadec-9-en-1-ylimino]diethanol
CAS 13127-82-7
EINECS 236-062-2
InChI InChI=1/C22H45NO2/c1-2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18-23(19-21-24)20-22-25/h9-10,24-25H,2-8,11-22H2,1H3/b10-9-

13127-82-7 – Physico-chemical Properties

Molecular Formula C22H45NO2
Molar Mass 355.6
Density 0.917±0.06 g/cm3(Predicted)
Boling Point 480.5±30.0 °C(Predicted)
Flash Point 202.6°C
Vapor Presure 3E-11mmHg at 25°C
pKa 14.41±0.10(Predicted)
Storage Condition 2-8℃
Refractive Index 1.483

25307-17-9 – Names and Identifiers

Name 2,2′-(octadec-9-enylimino)bisethanol
Synonyms ARMOSTAT710
bis(2-hydroxyethyl)oleylamine
2,2′-(octadec-9-enylimino)bisethanol
2,2′-(9-octadecenylimino)bis-Ethanol
Ethanol, 2,2-(9-octadecenylimino)bis-
2,2′-(9-Octadecen-1-ylimino)bisethanol
Ethanol,2,2′-(9-octadecen-1-ylimino)bis-
CAS 25307-17-9
EINECS 246-807-3

25307-17-9 – Physico-chemical Properties

Molecular Formula C22H45NO2
Molar Mass 355.5982
Density 0.8994 g/cm3
Boling Point 220-232 °C(Press: 0.5-1 Torr)
Water Solubility 5.9mg/L at 23℃
Vapor Presure 0.001Pa at 20℃
pKa 14.41±0.10(Predicted)
Refractive Index 1.4730 (589.3 nm 20℃

25307-17-9 – References

LogP 3.4 at 25℃
Application bis (hydroxyethyl) oleyl amine is an important petrochemical intermediate, in the chemical production has penetrated into all fields, but at present its domestic production in a relatively surplus state, as a raw material to synthesize new surfactants, increase the added value of diethanolamine, both enriched the types of surfactants.
preparation in a ml Four-necked flask equipped with a stirring device, 0.1mol of 1-bromo-9-dectene and 0.1mol of the corresponding Diethanolamine and anhydrous sodium carbonate were added, and 100ml of anhydrous ethanol was added as a solvent and reacted at 80 ° C. For 8 hours. After the end of the reaction, part of the ethanol is distilled off, and then the residual solids are removed by centrifugation. Then the residual ethanol is distilled off under normal pressure, and then the unreacted raw materials are distilled off under reduced pressure, after cooling, a pale yellow viscous liquid, bis (hydroxyethyl) oleyl amine, was obtained.