Automatic Aluminum ProfilesPowder Coating Line
We are a manufacturer based in China. We specialize in providing high-quality Automatic Aluminum ProfilesPowder Coating Line for industrial clients across various sectors. Whether you need chemicals consultation or technical support, our team is here to help.
Category：Powder Coating Lines Own Brand：MT /MOQ:100KG /From China/ B2B only.
Introduction
This fully automatic powder coating line provides a high-efficiency, integrated solution for consistent finishing of diverse metal substrates. It is expertly engineered for coating aluminum profiles, steel door frames, iron railings, and security fencing. The system ensures superior durability, excellent coverage, and maximum productivity through precision-controlled, automated processes.
Fast Color Change Powder Coating Cyclone Booth：
The automatic powder coating booth equipment is a key part of high efficiency powder coating line system.
It is not only setup for simple spraying but also comes with two step powder recovery system that is cyclone and after filter recovery units, to achieve fast color change and realize 98% powder recovery.
It is the most efficient solution for high powder coating output capacity and clean coating condition.
1、Cartridge Filter Unit
The secondary stage recovery unit usually includes 9-16 pcs cartridge filters.
As there are also some ultrafine powder particulates with light gravity will not fall down to cyclone bottom, they will be transfered to filter cartridges for final collecting.
Thus vented air stream from the whole system is free of dust particulates, creating a clean working environment.
2、Mono Cyclone Separator
Overspray powders will be transfered to cyclone first. The mono-cyclone is the most powerful choice for overspray collection especially in high speed and high productivity powder coating line.
The cyclone equipment uses centrifugal force and gravity to separate particulates from air stream according to their relative density. Thus, the powders will be effectively collected and transferred to the recycling equipment.
3、Self-cleaning Booth Floor
The booth floor is designed with air knives and mesh plates specially for self-cleaning.
The cleaning system is controlled by air blasts, which remove the powder accumulated on the booth floor and push it to the extraction and recovery system.
The booth floor always remains clean with just a minimum amount of powder, and increase powder coating recovery.
Cyclone Powder Coating Spray Booth Specifications：
| Booth Type | Automatic Type |
| Operator dimensions | Width800 x Depth6000 x Height2000 mm |
| Weight | 4000kg |
| Power supply | Electric |
| Nominal power | 15kw |
| Voltage | 380V/220V. customized as local. |
| Frequency | 50-60Hz |
| Filters | Polyester |
| Filters count | 32pcs (325*900) |
| Filters hang type | Rotary Wing, help filter cleaning |
| Filter cleaning system | Pneumatic |
| Booth Material | Wall:PVC; 聽Floor PVC & Stainless Steel |
| Cyclone Material | Stainless Steel |
| Warranty | 12 months |
Automatic Reciprocator Specifications：
| Power Supply | AC 220V/110V 50-60hz |
| Motor Power | 0.75 kW |
| Speed | 0-0.8m/s(0-50m/min) |
| Acceleration | 1 m/s |
| Max. Loading Capacity | 25 kg |
| Controller | Digital |
| Motor | Frequency Adjustable |
| Stroke | 2m |
| Qty of Spray Guns Loading | 2-12 pcs |
Powder Feed Center Specifications：
| Power Supply | AC 220V/110V 50Hz-60Hz (as required) |
| Overall Dimension | 1350*1940*900mm |
| Power Hopper Size | 550*550*550mm |
| Sieve Frame Size | φ400mm |
| Standard Mesh Size | 80 mesh (on request) |
| Air-in Pressure | 6-8bar |
| Recommended Air Compressor HP | 20kw(30HP) |
| Air Consumption | About 300 m³/h standard |
| Ambient | 5-40 ℃ |
Powder Coating Oven：
1. Specially designed for customers to carry out batch curing of aluminum profiles.
2. Completely new 100mm thickness rock wool board is perfectly to keep the temperature inside of oven which is very important.
3. I’s a convection oven with indirect heating type,use heating exchange(stainless steel),more clean heat air and long life span.
4. PLC control system to operate the oven heating performance easily and precisely.
5. COLO powder coating ovens are designed to safely and efficiently cure previously applied powder coating media.
Powder Coating Oven Specifications：
| Worksize Dimensions | Width880 * Height2785 * Length26000 mm |
| Open Dimensions | Width600 * Height1900 mm |
| Power Supply | Gas |
| Warm-up Time | 15-30 min. (180° C) |
| Temperature Stability | < ± 3.0-6°C |
| Temperature | Max. 250° C |
| Oven Body | 100mm Rock woll, 1.5mm Galvanized steel sheet |
| Burner | 40,0000cal |
| Ventilation Performance | 15000m3/h |
| Motor Power | 11kW |
| Warranty | 12 months |
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Inquiry
Factory & Certification
