Agricultural Machinery Powder Coating
We are a manufacturer based in China, specializing in high-quality Agricultural Machinery Powder Coating for industrial clients worldwide. Technical support and custom formulation available.
Category：Application industries, powder Coating | Brand：MT
Introduction
Agricultural Machinery Powder Coating
Agricultural Machinery Powder Coating is designed for the exterior components and housings of agricultural equipment exposed to mechanical wear and outdoor conditions. It offers adhesion, impact resistance, flexibility, and customizable colors. Its electrostatic application properties help improve powder deposition on complex workpieces, including recessed areas and grooves.
Features
Mechanical Durability
Good adhesion, impact and scratch resistance, surface hardness, and flexibility help protect coated components during service.
Outdoor Appearance
Gloss and color retention help maintain the appearance of agricultural machinery exposed to outdoor conditions.
Electrostatic Application
Controlled particle size and suitable charging properties help powder reach grooves and recessed areas where the Faraday cage effect can reduce deposition.
Efficient Powder Use
Good leveling and transfer efficiency support consistent coverage. Recovered powder can be sieved and reused at a controlled ratio when suitable for the coating system.
The product is described as free of heavy metals and environmentally friendly. Specific environmental compliance claims should be confirmed against the formulation, applicable regulations, and supporting documentation.
Product Parameters and Test Results
| Item | Quality Requirements / Test Method | Test Results |
|---|---|---|
| Appearance | Uniform color, loose powder without agglomeration; dry powder flowability: 120–140 | Visual inspection; good dry powder flowability |
| Color | According to customer requirements and the approved sample | Color difference meter and visual inspection |
| Particle Size Distribution | Particle size analyzer; GB/T 6554; 30–36 μm | Passed |
| Gel Time | Gel time tester; GB/T 6554-1986; 180 ± 30 seconds | Passed |
| Horizontal Flow | Horizontal flow tester; GB/T 6554; within the agreed specification range | Passed |
| Adhesion | Cross-cut test; ISO 2409 / GB/T 9286-1998 | Grade 0 |
| Impact Resistance | Impact test; ISO 6272 / GB/T 1732-1993 | 50 kg·cm |
| Flexibility | Bending test; ISO 1519 / GB/T 6742-1986 | 3 mm |
| Cupping Test | ISO 1520 / GB/T 9753-1993 | Passed |
| Surface Hardness | Pencil hardness test; ASTM D3363 / GB/T 6739-1996 | 2H or above |
| Heat Resistance | 150°C for 24 hours (white coating) | Good gloss retention; color difference below 0.5 |
| Damp Heat Resistance | ISO 6270 / GB/T 1740-1979 | More than 1,000 hours |
| Salt Spray Resistance | ISO 7253 / GB/T 1771-1991 | More than 500 hours |
| Accelerated Weathering | Source test cycle: 60°C for 8 hours UV exposure and 50°C for 4 hours condensation; 500 hours using QUV-B313 lamps | Gloss retention above 50%; color difference ΔE < 3.5 |
Note: The values above are based on the supplied product information. Actual performance may vary with formulation, color, film thickness, substrate preparation, curing conditions, and test procedures. Confirm the applicable test methods and results before using them as guaranteed specifications.
Application Areas
Agricultural Machinery Powder Coating is suitable for exterior components and housings of agricultural machinery and equipment, including:
- Large tractors and power tillers
- Land leveling machines, plows, and cultivators
- Rice transplanters and seeders
- Threshers and combine harvesters
- Water pumps and lawn mowers
- Other agricultural machinery and metal equipment
Contact our team for agricultural machinery powder coating specifications, customized colors, samples, and technical support. Please share the substrate material, application environment, required finish, and annual demand to help us recommend a suitable product.
Inquiry
We'll reply within 24 hours
