Acrylic (natural drying type) coatings
Formulation: Acrylic resin(45%)80%+Pigment 7.5%+Water reducing agent 2%+Solvent 5%+Auxiliaries 5.5%.
Oil-based construction additives
Natural Drying Acrylic Coatings Overview
Category
Details
...
Category：CFC
Introduction
Formulation: Acrylic resin(45%)80%+Pigment 7.5%+Water reducing agent 2%+Solvent 5%+Auxiliaries 5.5%.
Oil-based construction additives
Natural Drying Acrylic Coatings Overview
| Category | Details |
|---|---|
| Product Type | Water-based/solvent-borne decorative/protective finish |
| Binder System | Thermoplastic acrylic polymer (non-crosslinking) |
| Key Applications | – Building Exteriors: Stucco, masonry – Automotive: Primer/topcoat – General Metal: Equipment, railings |
| Core Properties | – Weather Resistance: UV stable, minimal chalking – Color Retention: Excellent gloss/hue stability – Water Resistance: Forms hydrophobic film |
| Technical Data | – Dry Time: 1-2h (surface), 24h (full cure) – VOC Content: 50-250g/L – Solid Content: 30-50% – Application Temp: 5-35°C |
| Performance | – Flexibility: Moderate (may crack on >2mm bends) – Abrasion Resistance: Suitable for low-traffic areas – Adhesion: Good on properly prepared substrates |
| Application | – Methods: Brush, roller, spray – Thinning: Water (water-based) or manufacturer’s solvent – Recoating: 4-6h minimum |
| Safety | – Handling: Use respirator for solvent variants – Skin Contact: Wash with soap/water – Storage Temp: 5-30°C |
| Limitations | – Solvent Resistance: Not for hydrocarbon exposure – Hardness: <2H pencil – Temperature Limit: Not for >80°C surfaces |
| Regulatory | Complies with global architectural VOC standards (EPA, EU) |
Note: Offers good balance of economy and performance for low-to-moderate corrosion environments. Suitable for DIY and maintenance applications where rapid drying is prioritized.
Factory & Shipment
