4,4’-Methylene Bis(2-chloroaniline)
CAS No. 101-14-4
Content 95%,86%
Packing 25kg/bag
Names and Identifiers
Name
4,4′-methylene-bis(2-chloroaniline)
Synonyms
MOCA
MOCA-WH
bis amine
bisamine s
bis-amine a
Sulfonating Agent ...
Category：Paint chemicals
Introduction
CAS No. 101-14-4
Content 95%,86%
Packing 25kg/bag
Names and Identifiers
| Name | 4,4′-methylene-bis(2-chloroaniline) |
| Synonyms | MOCA MOCA-WH bis amine bisamine s bis-amine a Sulfonating Agent MOCA METHYLENE-BIS-ORTHOCHLOROANILINE 4,4′-Methylen-bis-(2-chloranilin) 4,4-Methylenebis(4-chloroaniline) 4,4′-Methylenebis-(2-chlroaniline) 4’4-methylene-bis-(2-chloroaniline) 4,4′-Methylene-bis(o-chloroaniline) 2,2-dichloro-4,4-methylenedianiline 4,4′-methylene-bis(2-chloroaniline) 4,4′-Methylene bis(2-chloroaniline) 4,4′-methanediylbis(2-chloroaniline) 4,4′-methanediylbis(3-chloroaniline) 3,3′-methanediylbis(2-chloroanilinato) 4,4-Methylene-Bis(Ortho-Chloroaniline) Bis-(4-Amino-2,3-dichlorophenyl)-methane 4,4′-Diamino-3,3′-dichlorodiphenylmethane 3,3′-Dichloro-4,4′-Diaminodiphenyl methane |
| CAS | 101-14-4 |
| EINECS | 202-918-9 |
| InChI | InChI=1/C13H12Cl2N2/c14-12-8(3-1-5-10(12)16)7-9-4-2-6-11(17)13(9)15/h1-6H,7,16-17H2 |
101-14-4 – Physico-chemical Properties
| Molecular Formula | C13H12Cl2N2 |
| Molar Mass | 267.154 |
| Density | 1.354g/cm3 |
| Melting Point | 102-107℃ |
| Boling Point | 419.607°C at 760 mmHg |
| Flash Point | 207.571°C |
| Water Solubility | <0.1 g/100 mL at 25℃ |
| Vapor Presure | 0mmHg at 25°C |
| Refractive Index | 1.671 |
| Physical and Chemical Properties | White to light yellow loose needle Crystal, black when heated. Slightly hygroscopic. |
| Use | Used as a curing agent for cast polyurethane rubber, can also be used to cure epoxy resin |
101-14-4 – Risk and Safety
| Hazard Symbols | T – Toxic N – Dangerous for the environment |
| Risk Codes | R22 – Harmful if swallowed R45 – May cause cancer R50 – Very Toxic to aquatic organisms R53 – May cause long-term adverse effects in the aquatic environment |
| Safety Description | S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S53 – Avoid exposure – obtain special instructions before use. S60 – This material and its container must be disposed of as hazardous waste. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 2018 |
101-14-4 – Upstream Downstream Industry
| Raw Materials | 2-Chloroaniline Formaldehyde |
Inquiry
Factory & Shipment
