STD2010 Modified cellulose ether for cementitious use

We are a manufacturer based in China. We specialize in providing high-quality STD2010 Modified cellulose ether for cementitious use for industrial clients across various sectors. Whether you need chemicals consultation or technical support, our team is here to help.

Category:Paint chemicals   MOQ:100KG  Shipped directly from China

Advantage:Customizable,Free Samples,Please tell me your specific needs↓↓↓

Introduction

It has good water retention, which reduces the entry of moisture from the mortar into the substrate, as well as good slip resistance.

Introduction

STD2010 is a specially engineered cellulose ether designed to enhance the performance of cement-based construction materials. This high-performance additive improves workability, water retention, and adhesion while maintaining optimal mechanical properties in various cementitious systems. The following tables provide comprehensive technical information about this advanced construction chemical.

Fundamental Physical & Chemical Properties

Property Specification Range Test Method
Appearance White to off-white powder Visual inspection
Moisture content ≤4.5% ASTM D7191
Bulk density 0.35-0.55 g/cm³ ISO 697
pH (1% solution) 6.0-8.5 ASTM E70
Particle size 80% ≤100μm Laser diffraction
Ash content ≤5.0% ISO 2144

Rheological Properties (2% aqueous solution at 20°C)

Parameter Typical Value Measurement Method
Brookfield viscosity 30.000-50.000 mPa·s LV spindle, 20 rpm
Gelation temperature >75°C Hot water bath method
Hydration time <10 minutes Visual assessment
Pseudoplasticity index 0.40-0.50 Rheometer measurement
Water retention ≥95% Filter paper method

Performance Advantages in Cementitious Systems

Performance Aspect Improvement Effect Benefit
Workability 30-40% increase Easier application
Water retention 95-98% retention Reduced cracking
Open time 20-30% extension Better workability
Adhesion strength 15-25% improvement Stronger bond
Shrinkage reduction 20-35% decrease Fewer cracks

Recommended Dosage Guidelines

Application Dosage Range (% by cement weight) Key Benefit
Tile adhesives 0.2-0.6% Improved adhesion
Self-leveling compounds 0.05-0.3% Better flowability
Cement renders 0.15-0.5% Enhanced workability
Repair mortars 0.2-0.8% Reduced shrinkage
EIFS base coats 0.3-0.7% Improved crack resistance

Compatibility with Common Cement Additives

Additive Type Compatibility Level Recommended Usage
PCE superplasticizers Excellent Can be used together
Redispersible powders Very good Enhances flexibility
Air-entraining agents Good No negative effect
Retarders Good May require adjustment
Accelerators Fair Dosage optimization needed

Conclusion

STD2010 modified cellulose ether represents an advanced solution for cementitious applications, offering superior water retention, workability enhancement, and improved mechanical properties. Its balanced rheological characteristics and excellent compatibility with other additives make it particularly valuable for high-performance construction materials. The product’s consistent quality and reliable performance ensure optimal results in various cement-based formulations.

 

20+ years export experience. If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon.

Inquiry

    Factory & Shipment

    chemical factory
    chemical factory
    chemical factory
    chemical factory