Two-component epoxy (solvent-based) floor paint
We are a manufacturer based in China. We specialize in providing high-quality Two-component epoxy (solvent-based) floor paint for industrial clients across various sectors. Whether you need chemicals consultation or technical support, our team is here to help.
Category：Specialty Additive Own Brand：MT /MOQ:100KG /From China/ B2B only.
Introduction
Formulation:
Epoxy resin(75%)45%+Pigment 10%+CaCo3/17%+Solvent 25%+Auxiliary 3%
Oil-based construction additives
Two-Component Epoxy (Solvent-Based) Floor Paint: Technical Overview
| Category | Specifications |
|---|---|
| Product Type | Two-component epoxy floor coating (solvent-based) |
| Base Component (A) | Epoxy resin (Bisphenol-A type) |
| Curing Agent (B) | Modified polyamine/amide |
| Mix Ratio (A:B) | 4:1 by volume (varies by formulation) |
| Pot Life (25°C) | 45-60 minutes |
| Full Cure Time | 7 days (at 25°C, 50% RH) |
| Recommended DFT | 150-300 µm per coat |
Key Properties
| Property | Performance Data |
|---|---|
| Adhesion (ISO 4624) | ≥5 MPa (concrete/metal) |
| Abrasion Resistance | ≤50 mg (CS-10 wheel, 1000 cycles) |
| Chemical Resistance | Excellent vs. oils, acids, alkalis |
| Impact Resistance | Passes 50 kg·cm (ASTM D2794) |
| Gloss Level | 60-90° (60° gloss meter) |
Application Data
| Parameter | Guidelines |
|---|---|
| Substrate Prep | Concrete: ≥C25. moisture <4%; Metal: Sa 2.5 blast |
| Application Methods | Roller, brush, or airless spray |
| Temperature Range | 10-35°C (substrate & air) |
| Recoat Window | 12-24 hours (touch-dry) |
| Coverage | 0.25-0.35 kg/m² per 100 µm DFT |
Safety & Compliance
| Aspect | Details |
|---|---|
| VOC Content | 350-450 g/L |
| Flash Point | Component A: 35°C; Component B: 40°C |
| GHS Classification | H315. H317. H319. H335 |
| PPE Requirements | Gloves, goggles, respirator |
| Shelf Life | 12 months (unopened, 25°C) |
Advantages vs. Alternatives
| Feature | Epoxy (Solvent) | Waterborne Epoxy | Polyurethane |
|---|---|---|---|
| Chemical Resistance | ★★★★★ | ★★★☆ | ★★★★ |
| Cure Speed | ★★★★ | ★★★ | ★★★★ |
| Adhesion | ★★★★★ | ★★★★ | ★★★☆ |
| VOC Level | Medium | Low | Medium-High |
| Cost Efficiency | High | Medium | Highest |
References:
ISO 12944-5:2018 (Corrosion protection)
ASTM D4060-19 (Abrasion resistance)
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Inquiry
Factory & Shipment
