2,2′-Azobis(2-methylpropionamidine) dihydrochloride CAS No.:2997-92-4
Category：Pharmaceutical Materials
Introduction
2,2′-Azobis(2-methylpropionamidine) dihydrochloride Usage： Used as intermediates for synthetic pharmaceuticals, dyes, and other chemicals. Initiating agents, acrylic acid, vinyl, and allyl monomer polymerization initiators. 2,2′-Azobis(2-methylpropionamidine) dihydrochloride Packaging and Shipping： 25kg/drum or as per buyer’s requirements 2,2′-Azobis(2-methylpropionamidine) dihydrochloride Storage: Storage in ventilated low temperature dry warehouse; Keep container closed and separately from open flame and heat source.
Azodicarbonamide hydrochloride, chemical formula C8H20Cl2N6, is a common azo compound. The following is an introduction to its properties, uses, manufacturing methods, and safety information:
nature:
-Appearance: Azodicarbonamide hydrochloride exists in the form of colorless or pale yellow crystals or powder.
-Melting point: 175-177 ° C (lit.)
-Soluble: It is easily soluble in water and also soluble in organic solvents such as alcohols and ethers.
-Stability: It can decompose and release toxic and flammable gases when exposed to acids, alkalis, oxidants, and other substances.
Purpose:
-Azodicarbonamide hydrochloride is mainly used as a raw material for dyes and pigments. It can utilize its azo structural characteristics to dye textiles and leather, giving them bright colors.
-It can also be used to manufacture pigments, paints, etc.
Manufacturing method:
-The preparation of azobisisobutyramidine hydrochloride is generally obtained by reacting nitrous acid with isobutylamine. The reaction conditions are at room temperature. An appropriate amount of nitrous acid is reacted with isobutylamine under acidic conditions to generate azo compounds, which are then reacted with hydrochloric acid to form hydrochloride salts.
Security information:
-Azodicarbonamide hydrochloride is a toxic substance that poses certain hazards to human health and the environment. During the operation, attention should be paid to avoiding direct contact with the skin, eyes, and inhalation of their dust. Appropriate protective measures must be taken, such as wearing chemical protective gloves, goggles, and respiratory protective equipment.
-When storing, avoid contact with substances such as acids, alkalis, oxidants, etc., and avoid sources of fire and high-temperature environments to prevent explosions or fires.
-Waste disposal should be carried out in accordance with local regulations to avoid polluting the environment.
| Name | 2,2′-azobis[2-methylpropionamidine] dihydrochloride |
| Synonyms | V50 AIBA AAPH 2,2′-AZOBIS-(2-AMIDINOPROPANE), 2HCL Azo two isobutyl Acetamiprid hydrochloride 2,2′-AZOBIS-(2-AMIDOPROPANE) HYDROCHLORIDE 2,2′-AZOBIS(ISOBUTYRAMIDINE) DIHYDROCHLORIDE 2,2′-AZOBIS(2-AMIDINOPROPANE) DIHYDROCHLORIDE 2,2-azobis(2-methylpropionamidine)dihydrochlorid 2,2′-Azobis(2-methylpropionamide)dihydrochloride 2,2′-azobis(2-methyl-propionamidindihydrochloride 2,2′-azobis[2-methyl-propanimidamiddihydrochloride 2,2′-azobis(2-methyl-propanimidamiddihydrochloride 2,2′-AZOBIS(2-METHYLPROPIONAMIDINE) DIHYDROCHLORIDE 2,2′-Azobis(2-Methylpropionamidine) Dihydrochloride 2,2′-azobis[2-methylpropionamidine] dihydrochloride 2-(2-amino-2-imino-1,1-dimethyl-ethyl)azo-2-methyl-propanamidine dihydrochloride |
| CAS | 2997-92-4 |
| EINECS | 221-070-0 |
| InChI | InChI=1/C8H18N6.2ClH/c1-7(2,5(9)10)13-14-8(3,4)6(11)12;;/h1-4H3,(H3,9,10)(H3,11,12);2*1H |
| InChIKey | LXEKPEMOWBOYRF-QDBORUFSSA-N |
| Molecular Formula | C8H20Cl2N6 |
| Molar Mass | 271.19 |
| Density | 0.42 |
| Melting Point | 175-177°C(lit.) |
| Boling Point | 336.4°C at 760 mmHg |
| Flash Point | 157.3°C |
| Water Solubility | 176.2g/L at 20℃ |
| Solubility | acetone, dioxane, methanol, ethanol, DMSO and water: soluble |
| Vapor Presure | 0Pa at 20℃ |
| Appearance | White Crystal |
| Color | White to off-white |
| Storage Condition | 0-6°C |
| Stability | Unstable. Sensitive to heat and light. Incompatible with strong oxidizing agents, strong acids. |
| Sensitive | Sensitive to light |
| MDL | MFCD00142725 |
| Use | Synthetic intermediates for chemicals such as pharmaceuticals and dyes. Initiator, acrylic acid, vinyl, allyl monomer polymerization initiator. |
,Disclaimer: The above content is for reference and communication only among industry insiders, and does not guarantee its accuracy or completeness. According to relevant laws and regulations and the regulations of this website, units or individuals who purchase related items should obtain valid qualifications and qualification conditions.
